As the European Union tries to reduce its dependence on Russian energy, the Russian president recently said Russia would try to shift its energy exports to the east, adding that there was no way for European countries to give up Russian gas immediately.

Russia supplies about 40 percent of the EU's gas, and western sanctions imposed over the conflict with Ukraine have complicated financing and logistical arrangements for existing agreements, hitting Russian energy exports, the report noted.  

Russia has been building closer ties with China and other Asian countries as the European Union debates whether to impose sanctions on Russian gas and oil and member states seek supplies from elsewhere, Reuters said.  

"So-called partners from unfriendly countries admit that they cannot survive without Russian energy, including gas," the Russian president said in a televised government meeting. There is no reasonable alternative to Russian gas in Europe right now."  

He also said Europe was driving up energy prices and destabilizing markets by talking about cutting off Russia's energy supplies. Russia, which produces about a tenth of the world's oil and a fifth of its natural gas, will need new infrastructure to increase energy supplies to Asia, he said.

He ordered Moscow to submit a plan by June 1, including "the expansion of transport infrastructure to countries in Africa, Latin America, and the Asia-Pacific region".  

He also sought to clarify the possibility of integrating two pipelines -- the Sakhalin-Khabarovsk-Vladivostok gas pipeline in the Far East and the "Power of Siberia" gas pipeline to China -- into Russia's unified gas supply system. In theory, connecting these routes to larger gas networks could allow Russia to divert gas from Europe to Asia.

Because of the ever-changing international situation, the supply and prices of international bulk Ti6Al4V alloy are still very uncertain.

What is Titanium Alloy?

Titanium alloy Ti6Al4V is a medium-strength α-β type two-phase titanium alloy containing 6% α-stabilizing element AI and 4% β-stabilizing element V. This alloy has excellent comprehensive properties and has obtained the most extensive applications in the aviation and aerospace industries.

The main properties and uses

Ti6Al4V titanium alloy is heated below 430 ℃ for a long time to form a very thin and protective oxide film. As the heating temperature increases, the oxide film thickens and its protection becomes poor. After the alloy was heated at 700 °C for 2 h, the oxide film thickness reached 25 μrn. Heating at temperatures above 800°C forms a sparse oxide layer. After heating at 1000 °C for 1 h, the thickness of the oxide layer reached 0.65 mm.

Ti6Al4V alloy can be welded by argon arc welding, spot welding, brazing, electron beam welding and plasma welding. The strength of the welded joint is basically the same as that of the base metal.

When Ti6Al4V titanium alloy parts are in contact with aluminum alloy and structural steel parts, especially under certain corrosive medium conditions, aluminum alloy and structural steel parts will suffer accelerated corrosion and damage as the anode of the contact couple due to the negative electrode potential. Therefore, between TC4 titanium alloy parts and aluminum alloy or structural steel parts, protective measures such as padding and anti-corrosion tape should be taken. TC4 alloy parts are strictly prohibited from contact with parts or tools of lead, zinc, cadmium, tin, silver, bismuth and other metals.

Before vacuum annealing, the oxide skin and oxygen-rich layer on the surface of the parts should be removed, and the oil should be carefully removed before entering the furnace. When vacuum annealing parts with complex shapes, fixtures must be used to reduce the deformation of parts. Into the furnace parts are preferably filled with pre-degassed titanium oxide-free chips to prevent oxidation of the parts.

Ti6Al4V titanium alloy is now widely used in the manufacture of aero-engine fans and compressor discs and blades, as well as various load-bearing beams, frames, joints and fasteners in aircraft structures.

About KMPASS

KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Ti6Al4V alloy, please send an email to: sales2@nanotrun.com

Important discoveries have been made in the study of anticancer drugs inhibiting the growth of gastric cancer cells in my country. According to "Science and Technology Daily", a research report provided by Ai Jun and others from the Fourth Hospital of Hebei Medical University showed that seven anticancer drugs including cisplatin had obvious inhibitory effects on gastric cancer cells (BGC-823) in vitro. However, there are certain differences, and it is ideal to use a medium concentration for 48 hours.
The nano-gold provided by our company can be used in various medical technologies such as flow cytometry, immunochromatography, etc. Nano-silver has strong inhibition and Killing effects without developing drug resistance. We also provide Ti6Al4V alloy. For more information on Ti6Al4V alloy, please consult us.

Inquiry us