Brazil, the world's largest coffee bean producer, recently announced that it is facing the worst drought in 91 years, affecting local hydropower generation and agricultural Titanium Diboride keeps going up.
About Titanium Diboride TiB2 Powder:
Titanium diboride powder is gray or gray-black and has a hexagonal (AlB2) crystal structure. Its melting point is 2980°C and it has high hardness. The anti-oxidation temperature of titanium diboride in the air can reach 1000℃, and it is stable in HCl and HF acid. Titanium diboride is mainly used to prepare composite ceramic products. Because of its resistance to molten metal corrosion, it can be used in the manufacture of molten metal crucibles and electrolytic cell electrodes.
Titanium diboride (TiB2) is an extremely hard ceramic with excellent mutation, oxidation stability and wear resistance. Titanium diboride (TiB2) is an extremely hard ceramic used, for example, in special ballistic armor applications. In addition, unlike most ceramic components, it is conductive. It is also a reasonable electrical conductor, so it can use the conduit material in aluminum smelting and can be formed by electrical discharge machining.
Titanium diboride (TiB2) is a ceramic material with high strength and hardness, and its melting point, hardness, strength-to-density ratio and wear resistance are relatively high. However, the current use of this material is probably only in the anti-evolving important application is the use of TiB2 waveguides in the electrochemical reduction of alumina to aluminum metal. If electrical discharge machining of TiB 2 is performed, other applications may develop rapidly. Can be perfected. The wide application of this material may be restricted by economic factors, especially the cost of densifying high melting point materials and the reduction in material performance changes. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Diboride TiB2 Powderin bulk.
Feature of TiB2 Titanium Diboride Powder:
Titanium diboride powder is gray or gray-black and has a hexagonal (AlB2) crystal structure. Its melting point is 2980°C and it has high hardness. The anti-oxidation temperature of titanium diboride in air can reach 1000℃, and it is stable in HCl and HF acid. Titanium diboride is mainly used to prepare composite ceramic products. Because it can resist the corrosion of molten metal, it can be used in the manufacture of molten metal crucibles and electrolytic cell electrodes.
Double anti-static packing
Performance of Titanium Diboride TiB2 Powder:
1. High melting point
2. High hardness
3. Wear resistance
4. Resistant to acids
5. Excellent conductivity
6. High thermal conductivity
How is Titanium Diboride TiB2 Powder produced?
Titanium Diboride TiB2 is the most stable of several titanium boron compounds. This material does not appear in nature, but it can be synthesized by carbothermal reduction of TiO2 and B2O3. Like most other covalently bonded materials, TiB2 is resistant to sintering and is usually compacted by hot pressing or hot isostatic pressing. Pressureless sintering of TiB2 can achieve high density but requires liquid sintering aids such as iron, chromium and carbon.
TiB2 does not naturally exist on the earth. Titanium diboride powder can be prepared by various high-temperature methods, such as direct reaction to prepare titanium or its oxide/hydride. When elemental boron exceeds 1000°C, carbothermal reduction by thermite reaction has been developed in various synthesis pathways. Electrochemical synthesis and solid-state reaction were used to prepare more refined titanium diboride in large quantities.
Technical Parameter of TiB2 Titanium Diboride Powder :
|Test Result (%)||Balance||31||0.45||0.009||0.19||0.01||0.02|
Application of Titanium Diboride TiB2 Powder:
Titanium Diboride (TiB2) is a hard material with high strength and high wear resistance at elevated temperatures. The high density, combined with the high elastic modulus and high compressive strength, has to lead to its use in armor components.
It is unaffected by most chemical reagents and has excellent stability and wettability in liquid metals such as zinc and aluminum. This, along with its high electric conductivity, has led to its use in Hall- Héroult cells for aluminum production. It is also used as crucibles for molten metals.Due to its high hardness, extremely high melting point and chemical inertness, TiB2 is a candidate material for many applications.
The combination of high hardness and medium strength makes it attractive for ballistic armor, but its relatively high density and difficulty in forming shaped parts make it less attractive than some other ceramics.
The chemical inertness and good conductivity of TiB2 have made it used as a cathode in Hall-Heroult batteries used for primary aluminum smelting. It can also be used as a crucible and metal evaporation boat for processing molten metal.
High hardness, medium strength and good wear resistance make titanium diboride a candidate material for sealing parts, wearing parts and composite materials with other materials and cutting tools.
Used in combination with other major oxide ceramics, TiB2 is used to form composite materials, where the presence of the material helps increase the strength and fracture toughness of the matrix.
Potential applications of TiB2
The current uses of TiB2 are almost limited to special applications in the fields of impact-resistant armor, cutting tools, crucibles, neutron absorbers and wear-resistant coatings.
TiB2 is widely used as a vaporizer for vaporizing aluminum. For the aluminum industry, it is a selective material that can be used as an inoculant for grain refinement when casting aluminum alloys because of its implantability, low solubility in molten aluminum and good electrical conductivity.
TiB2 films can be used to provide wear and corrosion resistance to inexpensive and/or strong substrates.
Storage Condition of Titanium Diboride TiB2 Powder :
Titanium Diboride TiB2 Powder dispersion performance and using effects, therefore, titanium diboride TiB2 powder should be sealed in vacuum packing and stored in cool and dry room, the titanium diboride TiB2 powder can not be exposure to air. In addition, the TiB2 powder should be avoided under stress.
Packing & Shipping of Titanium Diboride TiB2 Powder :
We have many different kinds of packing which depends on the titanium diboride TiB2 powder quantity.
Titanium diboride TiB2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium diboride TiB2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for titanium diboride, please feel free to contact us and send an inquiry, email address: email@example.com
Titanium Boride Properties
|Other Names||TiB2, TiB2 powder, titanium boride powder|
|Melting Point||2980 °C|
|Solubility in H2O||N/A|
|Thermal Expansion Coefficient||8.1×10-6m/m.k|
|Exact Mass||69.96656 Da|
Titanium Boride Health & Safety Information
A preparation developed in China; the comfort and the multifunctional properties of nanomaterials make "dead skin" capable of sensing again. Electronic skin is artificial skin that mimics the function of human skin. Recently, the world-renowned journal Advanced Science reported a simple and highly programmable electronic skin on a leather substrate developed by a Chinese team, which combines the natural complex structure of leather, the comfort of wearing, and the multi-functional properties of nanomaterials. , so that the "dead skin" has the ability to sense again.
In the future, Titanium Diboride will be used in various high-tech fields, and the market demand for Titanium Diboride will also be great. Please contact us for more information on Titanium Diboride.
The application of various concrete admixtures can not only improve the performance of concrete, but also promote the development of new concrete technologies, promote the application of industrial by-products in cementitious material systems, and al…
Early strength agent is an admixture which accelerates the development of concrete early strength and has no significant effect on later strength.…
Prices in the national electricity market averaged $87 per megawatt-hour in the first three months of the year, above the level promised by the federal government. Wholesale electricity prices for industry and large businesses have already exceeded t…